I23 HIGH BEAM (ONE) RH OR LH DOES NOT COME ON OR COMES ON IRREGULARLY/ - Lancia - Ypsilon - eLearn

When the steering column switch unit ring nut is operated with the ignition ON, one of the main beam headlamps does not work

1	CHECK ON INDIVIDUAL LIGHTS	All OK	Problems met	Operation
		Results of the tests
	Check the condition of individual bulbs and light units.	Continue to Step 2	Bulbs damaged	Replace bulbs
			Front right light cluster faulty	Repair or replace front lights cluster
			Front left light cluster faulty	Repair or replace front lights cluster
2	DIPPED HEADLAMPS ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check, in order: left or right main beam headlamp fuses; connections between engine bay control unit and bulbs; bulb earth: See E2012 MAIN BEAM HEADLAMPS	Continue to Step 3	Defective component	Replace the component involved (if a fuse is involved, search for the cause of the problem)
			Defective component	Restore the connections
			Defective component	Restore the earth to the bulbs See E2012 MAIN BEAM HEADLAMPS
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis