I30 LIGHTS CHECK NOT WORKING - Lancia - Ypsilon - eLearn

2427521 - I30 LIGHTS CHECK NOT WORKING

With the ignition on, the Body Computer does not detect faults in the operation of the side lights, stop lights or rear fog lamps, despite the fact that they are not working, and the 'Light failure' warning light does not come on

1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect the Examiner to the diagnostic socketCheck light operation on the instrument panel while in active diagnosis mode	Continue to Step 2	Light failure warning light does not come on	Replace instrument panel
		Continue to Step 2	Light failure warning light comes on	Continue to Step 2
2	CHECK ON BODY COMPUTER ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	check connections between Body Computer and instrument panel Connections between Body Computer and bulbs Body Computer power supply: See E2010 SIDE LIGHTS / NO. PLATE LIGHTS	Continue to Step 3	Connections not correct	Restore the connections: See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
		Continue to Step 3	Connections not correct	Restore the correct supply See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis