I80 HEADLAMP ALIGNMENT CORRECTOR NOT WORKING - Lancia - Ypsilon - eLearn

2427526 - I80 HEADLAMP ALIGNMENT CORRECTOR NOT WORKING

When operated with the dipped beam headlamps on, the headlamp adjustment knob does not work If the dipped beam headlamps do not work either, first see Table I05

1	CHECK ON HEADLAMP ALIGNMENT CORRECTOR ELECTRICAL CIRCUIT	All OK	Problems met	Operation
		Results of the tests
	Check: connection between centre control panel and NQS; connection between NQS and Dashboard Control Unit; connection between dashboard control unit and headlamp alignment motors; headlamp alignment motor and headlamp alignment control earth: See E3080 HEADLAMP AGLINMENT CORRECTOR In parameter mode the plausibility of all the parameters. In active diagnosis mode: operation of ABS warning light	Continue to Step 2	Connections not correct	Restore the connections: See E3080 HEADLAMP AGLINMENT CORRECTOR
		Continue to Step 2	Connections not correct	Restore the earth contacts : See E3080 HEADLAMP AGLINMENT CORRECTOR
2	CHECK ON HEADLAMP ALIGNMENT CONTROL	All OK	Problems met	Operation
	Check the operation of the headlamp alignment control device : See E3080 HEADLAMP AGLINMENT CORRECTOR	Continue to Step 3	Headlamp alignment control device faulty	Replace the left control panel
		Continue to Step 3	Headlamp alignment control device faulty	Replace instrument panel
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis