2427527 - I90 FOLLOW ME HOME FUNCTION IS NOT ACTIVATED

Follow me home function will not activate Low and high beams work properly;
The follow me home function must be activated by the user within two minutes of key off by operating light flasher stalk control
If the user maintains the light flasher stalk in flashing position for longer than two seconds, the follow me home function is deactivated.
Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
With the ignition in the ON position, check that the headlamp flasher is working properly.Continue to Step 2The flasher is not working.Continue to Step 1
1CHECKING OPERATION OF THE STEERING COLUMN SWITCH UNITAll OKProblems metOperation
Check the condition of the 'Follow me home' function circuit (steering column switch unit headlamp flasher). See   E2012  MAIN BEAM HEADLAMPS Continue to Step 2Circuit damagedReplace the steering column switch unit
2CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the Examiner to the diagnostic socket

Check:

  • that there are no faults in the Body Computer
  • the operation of the lights in active diagnosis.
End of diagnosisFault persists Replace the Body Computer