2427531 - K05 MILOMETER NOT WORKING

The milometer either does not work or does not work properly whilst driving.
The speedometer works properly. If the speedometer is faulty, see Table K003.
Results of the tests
0PRELIMINARY CHECKAll OKProblems metOperation

Check:

  • that the instrument panel light dimmer has not been selected.
  • That the mode button has not been pressed.
  • That there are no failure messages displayed
Continue to Step 1The display shows other informationRestore the display conditions using the control panel
1CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the Examiner to the diagnostic socketCheck that there are no faults in the instrument panel Continue to Step 2There are errorsProceed in accordance with the instructions given by the diagnostic equipment
2CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Keeping the Examiner connected to the diagnostic socket, check the operation of the display in active diagnosis.Continue to Step 3Milometer not workingReplace instrument panel Op. 5560B11
3ELECTRICAL CIRCUIT CHECKAll OKProblems metOperation
Check connections between instrument panel Body Computer and ABS control unit Continue to Step 4Faulty wiringRestore/replace the wiring: See   E4010  INSTRUMENT PANEL
4CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

With the diagnostic equipment (Examiner or other instruments) connected, check the CAN information:

  • For inactive control units;
  • That there are no control unit errors;
  • That there are no control units with CAN line errors
Continue to Step 5Presence of faultsContinue following the instructions for the diagnostic equipment
5CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer present End of diagnosis