K15 CLOCK NOT WORKING - Lancia - Ypsilon - eLearn

2427538 - K15 CLOCK NOT WORKING

With the ignition ON, the display does not display the time correctly or at all.

1	INSTRUMENT PANEL FUNCTIONS CHECK	All OK	Problems met	Operation
		Results of the tests
	check that the display shows the correct time; that it is possible to adjust the time; that the clock moves forward;	Continue to Step 2	The display/time cannot be seen properly	Continue to Step 2
			The time cannot be adjusted	Continue to Step 4
			The clock is stuck	Replace instrument panel Op. 5560B11
			The display/time cannot be seen properly	Continue to Step 2
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner to the diagnostic socketCheck that there are no faults in the instrument panel	Continue to Step 3	There are errors	Continue according to the instructions for the diagnostic equipment
3	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the Examiner connected to the diagnostic socket, check the operation of the display in active diagnosis.	End of diagnosis	Defective display	Replace instrument panel Op. 5560B11
4	ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check: Connections between control panel and instrument panel Connections between control panel and earth; Control panel power supply; Control panel earth See E4010 INSTRUMENT PANEL	Continue to Step 5	Connections defective, earth or supply defective	Restore the correct connections, if necessary, replace the wiring : See E4010 INSTRUMENT PANEL
5	LEFT CONTROL PANEL CHECK	All OK	Problems met	Operation
	Check that the left control panel is working properly: See E4010 INSTRUMENT PANEL	Continue to Step 6	Control panel defective	Replace the control panel Op. 7040A56
6	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis