2427554 - K50 I.E. FAILURE WARNING LIGHT ON

The engine management control unit warning light remains on. The CODE warning light comes on and goes out.

The CODE warning light going out means that the dialogue between the two control units has gone well.

		Results of the tests
1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket.Check that there are no errors in the control unit	Continue to Step 2	An error is detected in the control unit	Continue according to the instructions for the diagnostic equipment
2	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Continue as instructed See table   B10  ENGINE DOES NOT START