2427555 - K52 CODE FAILURE WARNING LIGHT ON

The CODE warning light is controlled by the Body Computer Node.

		Results of the tests
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the tester to the Body Computer Node and check for CODE malfunctions	Continue to Step 2	Presence of malfunctions	Continue as instructed by the tester
2	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment or keep it connected and check at the operation of the Code warning light at the INSTRUMENT PANEL NODE through active diagnosis	Continue to Step 3	Code Warning light does not flash	Replace instrument panel Op. 5560B11
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	.