| | Results of the tests |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the diagnostic equipment and check that there are no system/component
faults in the Air Bag control unit | Continue to Step 2 | System/component fault | Continue according to the
instructions for the diagnostic equipment |
| 2 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
|---|
| Check
the continuity and the insulation of the fault warning light control
lead from airbag control unit to instrument panel See E7030 AIRBAG | Continue to Step 3 | Wires in o.c. or s.c. | Renew the wiring See E7030 AIRBAG |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Change airbag control unit Op. 5580C14 |
