K82 PASSENGER AIR BAG DISABLED WARNING LIGHT - Lancia - Ypsilon - eLearn

The fault warning light is on and the passenger air bag is not excluded from the control selector

The passenger airbag disablement warning light is controlled directly via a dedicated link to the Instrument Panel Node from the airbag control unit

1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect the tester, check the airbag control unit for: system/component faults disablement control plausibility	Continue to Step 4	System/component fault	Continue according to the instructions for the diagnostic equipment
		Continue to Step 4	Command not plausible	Continue to Step 2
2	ELECTRICAL EQUIPMENT CHECK	All OK	Problems met	Operation
	Check the continuity and the insulation of the wires between the selector control on the passenger side facia and the airbag control unit. See E7030 AIRBAG	Continue to Step 3	Wiring short circuited or circuit open	Replace wiring See E7030 AIRBAG
3	CHECKING CONTROL SELECTOR	All OK	Problems met	Operation
	Check the correct operation of the selector on the passenger side facia	Continue to Step 4	Selector not working	Change passenger air bag disablement selector Op. 5580C26
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Change airbag control unit Op. 5580C14