2427586 - L16 CLIMATE CONTROL RECIRCULATION NOT WORKING

When the button in the switch panel is pressed, the recirculation function does not work.

		Results of the tests
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner and check for errors at the air recirculation motor.	Continue to Step 2	Air recirculation motor not working	Continue to Step 3
2	CHECKING USING TESTER	All OK	Problems met	Operation
	Keep the Examiner connected and check air recirculation motor operation by means of active diagnosis	Continue to Step 7	Air recirculation motor not working	Continue to Step 3
3	ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check the continuity/insulation of the electrical connection between the climate control Node and the air recirculation motor See   E6020  AIR CONDITIONING	Continue to Step 4	Electrical conection broken or not insulated.	Restore electrical connection continuity/insulation. See   E6020  AIR CONDITIONING
4	RECIRCULATION MOTOR OPERATION CHECK	All OK	Problems met	Operation
	Disconnect the electrical connector, air recirculation motor side, and check for a control signal from the climate control system node See   E6020  AIR CONDITIONING	Continue to Step 5	Signal absent	Continue to Step 7
5	CHECKING RECIRCULATION MOTOR FLAP	All OK	Problems met	Operation
	Check that the air recirculation motor flap moves through its travel without sticking.	Continue to Step 6	Flap blocked or damaged	Release the air recirculation motor flap from its block or replace the flap if damaged.
6	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present.	End of diagnosis	Fault persists	Change the air recirculation motor
7	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Change the climate control system node.