2428910 - 1040A74 inertia switch for electric pump supply circuit r + r

Removing ( Refitting ) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

NameConnector
-Battery  A1B 
1. Remove upper part of floor covering next to facia.2. Disconnect the electrical connection from the inertia switch.

NameConnector
2Inertia switch  I50 
3. Undo retaining nuts (3a) and remove inertia switch (3b)
Refitting ( Removing ) Connect the electrical connection to the inertia switch.Place the inertia switch back in its housing and fix it using the bolts.Put the floor trim back in its place.Connect the negative (-) battery terminal.