2429114 - 2110D52 l/h flange on differential - r + r with drive shaft removed

Removing ( Refitting ) 1. Undo the plug and drain the manual gearbox and differential.

Collect the manual gearbox and differential oil in a suitable container.

1. Remove the left differential internal driveshaft using a special lever.2. Undo the bolts (2a) and remove the left flange on the differential (2b) complete with oil seal.Remove the adjustment shim. At the bench, remove the oil seal from the left flange on the differential.

Take care not to damage the oil seal seat during removal.

Refitting ( Removing ) 1. Fit a new oil seal (1a) on the left flange on the differential using the tools (1b) and (1c).

	Name	Country
1b	Grip	1.870.007.000

	Name	Country
1c	Fitting tool	1.870.629.000

Place the adjustment shim back in its housing.1. Place the left flange on the differential (1a) back in its housing complete with oil seal and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	MAN G/BOX DIFF SEALING FLANGE/S	M8	(Differential side) 1.8 ÷ 2.2

2. Place the left differential internal driveshaft back in its housing. 1. Tighten the manual gearbox and differential fluid drain plug to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Drain plug	GEAR CASING PADS	M16	(Differential side) 1.6 ÷ 2.0

Refill the manual gearbox and differential  - 0010T41  MANUAL GEARBOX OIL - Check level and top up, if necessary .