3340A20 ABS ELECTRONIC CONTROL UNIT - R+R - Lancia - Ypsilon - eLearn

2429187 - 3340A20 abs electronic control unit - r+r

) Proceed with removal - 5530B10 battery - r+r . Proceed with removal - 5505A13 supplementary junction control unit in engine bay - r r . 1. Undo bolts (1a) and move engine bay junction unit (1b) aside after releasing the accelerator control potentiometer wiring from the bands.

1. Disconnect the electrical connection from the ABS electronic control unit.

	Name	Connector
1	ABS control unit	M50

1. Undo the bolts (1a) and separate ABS electronic control unt (1b) from the hydraulic assembly.2. Remove the gasket.

Refitting ( Removing

) Refit the ABS electronic control unit in its seat with a gasket and tighten the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Connect the electrical connection to the A.B.S. electronic control unit. Refit the engine bay junction unit mount, secure the electrical wiring to the bands and tighten the bolts. Proceed with refitting - 5505A13 supplementary junction control unit in engine bay - r r . Proceed with refitting - 5530B10 battery - r+r .

For versions with ESP, if the ABS hydraulic and electronic control unit is replaced, calibrate the control unit following the procedure indicated by the Examiner diagnostic station.