2429455 - 5580C40 sidebag sensor (one), lh or rh - r r

Before removing and refitting the control unit, carry out the following preliminary operations.
Place the ignition key in the OFF position and extract it;Disconnect the battery. Removing ( Refitting )  - 7040L40  front compartment scuff strip - r r - 7050A20  one-piece rear seat cushion - r r - 7050A10  rear seat - r+r - 7040H50  rear panel - r r1. Working inside the front seat belt pretensioner compartment, move the belt slightly.2. Undo the bolt3. Move sensor (3a) slightly, release reference pin (3a) from its seat and disconnect electrical connection (3b).

NameConnector
3Sensor for driver's, Side Bag  K66 

NameConnector
3Sensor for driver's, Side Bag  K67 
4. Recover the sensor.
Refitting ( Removing ) Check that the side Air Bag sensor is not damaged.1. Connect the electrical connection.2. Position the Side Bag sensor (2a) in its housing.
The pin (2b) should fit in the hole (2c) on the pillar.
3. Tighten the bolt.
 - 7040H50  rear panel - r r - 7050A10  rear seat - r+r - 7050A20  one-piece rear seat cushion - r r - 7040L40  front compartment scuff strip - r r