2429496 - 7005C52 interior opening handle - r r
Removing ( Refitting ) Lower the window.1. Disconnect the cable (1a) from the retainers (1b).2. Use a drift and remove the pin (2a) removing it upwards Keep the spring (2b) and the handle (2c).
Refitting
(
Removing
)
Check that the handle is undamaged.Fit the handle.Refit the spring (1a) in place with the
ends (1b) and (1c) in the housings shown in the diagram to produce a
slight pre-loading at the end of the fitting process.
Fit the pin in position.Connect the cable to the retainers.Test the operation of the handle.