2428852 - 1008A42 gear box left rigid mount - r r

Removing ( Refitting ) Position the vehicle on the ramp. Proceed with removal  - 5530B10  battery - r+r . Proceed with removal  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. . Proceed with removal  - 1008C30  power unit lower reaction link r r . 1. Undo the bolt fixing the lower radiator crossmember to the bodyshell.2. Fit the tool (2a) and secure it using the bolts (2b).

The above bolts are fitted in place of the bolt fixing the lower radiator crossmember to the bodyshell and in place of the bolt fixing the power unit lower reaction rod to the front suspension crossmember.

	Name	Country
2a	Crossmember	1.870.595.000

1. Undo the bolts fixing the power unit gearbox side rigid support to the flexible mounting. 1. Release the supply pipe from the master cylinder (1a) from the bands (1b) on the flexible mounting for the gearbox side rigid power unit support.2. Undo the bolt (2a) and remove the power unit gearbox side rigid engine mount (2b). Refitting ( Removing ) 1. Refit the gearbox side power unit rigid support (1a) in its seating and tighten the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	(Gearbox side) 4.5 ÷ 5.5

2. Release the supply pipe from the master cylinder (2a) from the bands (2b) on the flexible mounting for the gearbox side rigid power unit support. 1. Undo the bolt fixing the gearbox side rigid power unit support to the flexbile block to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M12	(Flexible mounting side) 8.1 ÷ 9.9

Remove the safety tool used for supporting the power unit.

	Name	Country
-	Crossmember	1.870.595.000

Tighten the bolt securing the radiator bottom crossmember to the bodywork. Proceed with refitting  - 1008C30  power unit lower reaction link r r . Proceed with refitting  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting  - 5530B10  battery - r+r . Remove the car from the ramps.