2428909 - 1040A70 submerged pump assembly complete with level guage control - r + r

Removing ( Refitting ) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

Lift the rear seat cushion lift the floor covering to gain access to the fuel pump flap.1. Undo the bolts (1a) and remove the protective cover (1b).2. Disconnect the electrical connection from the fuel pump and level gauge.

	Name	Connector
2	Fuel pump and sender unit	N40

3. Disconnect the rapid attachment for the fuel supply pipe.4. Undo ring nut (4a) using tool (4b).

	Name	Country
4b	Key	1.870.736.000

5. Remove the immersed pump assembly complete with gauge. Refitting ( Removing ) Place the submerged pump assembly complete with gauge back in its housing.Refit the ring nut and tighten using the tool.

	Name	Country
-	Key	1.870.736.000

Connect the rapid attachment for the fuel supply pipe.Connect the electrical connection to the electric pump and fuel gauge sender unit.Place the protective cover back in its housing and fix it using the bolts.Put the floor trim back in its place.Lower the rear seat cushion.Connect the negative (-) battery terminal.