1084A42 ENGINE OIL PRESSURE WARNING LIGHT SWITCH - R + R - Lancia - Ypsilon - eLearn

2428961 - 1084A42 engine oil pressure warning light switch - r + r

) Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the engine oil pressure warning light switch.

	Name	Connector
1	Engine oil pressure sensor (switch)	K30

2. Undo and remove the engine oil pressure warning light switch.

Refitting ( Removing

) Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	OIL PRESSURE W/L	M14	3.2

Connect the electrical connection to the engine oil pressure warning light switch.Connect the negative (-) battery terminal.Remove the car from the ramps.