1036L20 CAMSHAFT IDLER GEARS - REPLACE - Lancia - Ypsilon - eLearn

2428993 - 1036L20 camshaft idler gears - replace

) Proceed with removal - 5530B10 battery - r+r . Proceed with removal - 1048A32 sleeve from air cleaner to intake manifold - r + r . Proceed with the removal - 1048A10 air cleaner filtering element - replace Proceed with removal - 1056B60 single fuel manifold pipe, with injectors - r + r . Proceed with removal - 1036L40 mount for seal on camshaft in cylinder head extension complete with coil/s - includes cleaning of mating surfaces sealant application . 1. Remove the camshaft protective plugs on the cylinder head extension.2. Rotate the camshaft, using small movements, and fit the camshaft timing tools.

The camshaft timing adjustment tools are also used as leverage when unscrewing/tightening the rear gear retaining bolts.

	Name	Country
2	Locating pin	1.860.985.000

1. Undo bolts (1a) and remove the camshaft idler gears (1b).

Refitting ( Removing

) 1. Place the camshaft idler gears (1a) back in their housings and tighten bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	IDLER GEAR ON INTAKE SHAFT	M12	12

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	IDLER GEAR ON EXHAUST SHAFT	M12	12

1. Remove the camshaft timing tools.

	Name	Country
1	Locating pin	1.860.985.000

2. Tighten the camshaft protective plugs on the cylinder head extension to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	-	TAPERED PLUG	M16 x 1.5	(Camshaft housing side) 1.5

Proceed with refitting - 1036L40 mount for seal on camshaft in cylinder head extension complete with coil/s - includes cleaning of mating surfaces sealant application . Proceed with refitting - 1056B60 single fuel manifold pipe, with injectors - r + r . Proceed with the refitting - 1048A10 air cleaner filtering element - replace Proceed with refitting - 1048A32 sleeve from air cleaner to intake manifold - r + r . Proceed with refitting - 5530B10 battery - r+r .