1068A20 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R R - Lancia - Ypsilon - eLearn

2429002 - 1068A20 accelerator pedal with built-in potentiometer - r r

) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

1. Release the steering column universal joint (1a) undoing the bolt (1b) fixing it to the steering box.

1. Disconnect the electrical connection for the accelerator pedal with built-in potentiometer.

	Name	Connector
1	Accelerator pedal potentiometer	K55

2. Undo the nuts (2a) and remove the accelerator pedal with potentiometer incorporated (2b).

Refitting ( Removing

) Connect the electrical connection to the accelerator pedal with built-in potentiometer.Place the accelerator pedal with potentiometer incorporated back in its housing and secure it using the bolts.Connect the steering column universal joint and fasten it by tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	INTERMEDIATE SHAFT CONNECTED TO STEERING BOX.	M10	(Steering box side) 5.0 ÷ 6.1

Connect the negative (-) battery terminal.