2429126 - 2125C20 gearbox manual control support and lever - r + r for checking and replacement if necessary
Removing ( Refitting ) Position the vehicle on the ramp. Proceed with removal - 5530B10 battery - r+r . Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with removal - 2125C16 gear hand-lever - r r . Proceed with removal - 7040L28 tunnel switch panel - r r . Proceed with removal - 7040L22 REAR TRIM on TUNNEL -R.R. . Proceed with removal - 7040L20 tunnel trim - r r . Proceed with removal - 7040A18 glove compartment on facia - arrange . Proceed with removal - 7040A30 Left instrument panel lower TRIM - R.R. . Proceed with removal - 2125A30 lever/knob cover - r + r . Proceed with removal - 7040A28 TRIM on gearbox control panel - R.R. . Proceed with removal . 1. Undo the nuts (1a) and the bolt (1b) and remove the manual gear control (1c).
1. At the bench, disconnect the gear selector and engagement cables
from the gearbox lever.2. Remove the gear selector and engagement cables (2a) releasing
the clips (2b) from the support.
1. Remove the gearbox lever (1a) and the housing (1b) from the support.
Refitting
(
Removing
)
Place the manual gearbox control lever
and the housing in the housing on the support. Place the gear selector and engagement
cables in their housings securing the clips to the support.Connect the gear selector and engagement
cables to the manual gearbox control lever.Place the manual gearbox control assembly
in its housing and secure it using the nuts and the bolt.
Proceed with refitting
.
Proceed with refitting
- 7040A28 TRIM on gearbox control
panel - R.R.
.
Proceed with refitting
- 2125A30 lever/knob cover - r +
r
.
Proceed with refitting
- 7040A30 Left instrument panel
lower TRIM - R.R.
.
Proceed with refitting
- 7040A18 glove compartment on
facia - arrange
.
Proceed with refitting
- 7040L20 tunnel trim - r r
.
Proceed with refitting
- 7040L22 REAR TRIM on TUNNEL
-R.R.
.
Proceed with refitting
- 7040L28 tunnel switch panel -
r r
.
Proceed with refitting
- 2125C16 gear hand-lever - r
r
.
Adjust the gear selector cable (OP2125C30). |