3310A48 FRONT BRAKE DISC - R R - Lancia - Ypsilon - eLearn

2429152 - 3310A48 front brake disc - r r

) Position the vehicle on the ramp.FOR LEFT BRAKE DISC Proceed with removal - 4450B02 left front wheel r r . FOR RIGHT BRAKE DISC Proceed with removal - 4450B04 right front wheel r r . 1. Release the block of the hose to the front brake caliper from the fastener on the front shock absorber. 2. Remove plugs (2a), undo the bolts (2b) and move the front brake caliper assembly (3c) to one side.

1. Undo the bolts (1a) and remove the front brake caliper bracket (1b).

1. Unscrew the bolts (1a) and remove the front brake disc (1b).

Refitting ( Removing

) 1. Refit the front brake disc (1a) in its seating and secure by tightening pins (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Pin	FRONT BRAKE DISC.	M8	(Wheel hub side) 1.0 ÷ 1.4

1. Place the front brake caliper bracket (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT BRAKE CALIPER BRACKET	M12	(Stub axle side) 10.0 ÷ 11.0

1. Refit the rear brake caliper assembly (1a) and tighten the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	-	-	-	-

2. Refit the front brake caliper bolt plugs. 3. Secure the block of the hose to the front brake caliper to the fastener on the front shock absorber.

FOR RIGHT BRAKE DISC Proceed with refitting - 4450B04 right front wheel r r . FOR LEFT BRAKE DISC Proceed with refitting - 4450B02 left front wheel r r . Remove the car from the ramps.