5510C26 RPM SENSOR - R+R - Lancia - Ypsilon - eLearn

2429380 - 5510C26 rpm sensor - r+r

) Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the engine rpm sensor.

	Name	Connector
1	Rpm sensor	K46

2. Undo the bolt (2a) and remove the engine rpm sensor (2b).

Refitting ( Removing

) Place the engine rpm sensor back in its housing and fix it using the bolt.Connect the electrical connection for the engine rpm sensor.Connect the negative (-) battery terminal.Remove the car from the ramps.