5520B10 STARTER MOTOR - R+R - Lancia - Ypsilon - eLearn

2429390 - 5520B10 starter motor - r+r

) Place the vehicle on a lift. - 5530B10 battery - r+r1. Working through the battery compartment, undo the top starter motor bolt.

Raise the car.1. Undo the nuts (1a) and disconnect the electrical connections (1b) from the starter motor.

	Name	Connector
1b	Starter' motor	A20A

	Name	Connector
1b	Starter' motor	A20B

2. Undo the lower fixing bolt (2a) and remove the starter motor (2b).

Refitting ( Removing

) Check that the starter motor is not damaged.1. Replace the starter motor in its housing and fix it tightening the lower bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STARTER MOTOR	M8	2.4 ÷ 3.0

2. Connect electrical connections (2a) and tighten nuts (2b).

1. Tighten the upper motor bolt to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STARTER MOTOR	M8	2.4 ÷ 3.0

- 5530B10 battery - r+rRemove the vehicle from the lift.