7005A08 INTERIOR SUPPORT FRAME OF ONE SIDE DOOR R R WITH DOOR PANEL REMOVED - Lancia - Ypsilon - eLearn

2429476 - 7005A08 interior support frame of one side door r r with door panel removed

) - 7005D14 front side door descending window glass - r r with door panel (and mount frame) removed1. Release the cover from the opening.2. Working via the opening (2a), loosen the inner bolt (2b) until the lock barrel assembly (2c) can be released.

1. Undo the lock bolts2. Lift up the ring nut (2a) and disconnect the electrical connection for the door (2b).

	Name	Connector
2b	Rear coupling for /front door. driver's side	D30

	Name	Connector
2b	Front passenger door/ rear coupling.	D31

3. Introduce the door electrical connection as far as possible into the door.4. Disconnect the electrical connections (4a), (4b).

	Name	Connector
4a	Driver's external rear view mirror	P60

	Name	Connector
4a	Exterior passenger side rear view mirror	P61

	Name	Connector
4b	Front door anti-crush sensor	K22

	Name	Connector
4b	Front door anti-crush sensor	K23

5. Release the wiring retainer.6. Undo the bolts.

1. Move the frame assembly (1a) slightly away from the door (1b).2. Disconnect the cable (2a) connected to the outer handle from the lock retainers (2b).

If necessary, continue - 7205E37 STRIPPING FRONT SIDE DOOR INNER SUPPORT FRAME

Refitting ( Removing

) Check that the frame is not damaged.1. Before positioning the frame (1a), check that the perimeter seal (1b) is intact and clean. Also check that the support surface of the door frame is clean.

Place the frame in position.Connect the connecting cable with the outer handle to the lock retainers.Tighten the frame fixing bolts.Engage the wiring retainers.Connect the electrical connections.Tighten the catch retaining bolts.Position the lock barrel, tighten the bolt and refit the cover. - 7005D14 front side door descending window glass - r r with door panel (and mount frame) removed