2429547 - 7025A58 device for holding bonnet lid open - r+r
Removing
(
Refitting
)
Open the bonnet lid.1. Rotate the support (1a) through 90 to release the retainer (1b),
then extract it.
1. Support the bonnet lid, then release the retainer (1a) from the
strut (1b) and extract the actual strut from the housing (1c).2. Extract the retainer from the housing in the bodyshel.3. Extract the support (3a) after having released the retainers
(3 b).
Refitting
(
Removing
)
Check that the support device
is not damaged.Position the support and attach the retainers.Place the retainer in position and fit
the strut fastening the retainer.Fit the support and rotate it into the
correct position attaching the retainer.
Removing
(
Refitting
)
Open the bonnet lid.1. Rotate the support (1a) through 90 to release the retainer (1b),
then extract it.
