7065B10 L/H OR R/H REAR SAFETY BELT (ONE) - R+R - Lancia - Ypsilon - eLearn

2429691 - 7065B10 l/h or r/h rear safety belt (one) - r+r

) - 7040L40 front compartment scuff strip - r r - 7050A20 one-piece rear seat cushion - r r - 7050A10 rear seat - r+r - 7040H50 rear panel - r r - 7040G30 boot light bulb holder - r r (left side only) - 7040H42 rear pillar trim - r r1. Undo the bolt (1a) and move the belt idler (1b).2. Undo the bolt (2a) and keep the reel and belt (2b).

Refitting ( Removing

) Check that the seat belt is undamaged.

If the seat belt has been subjected to great stress, e.g. following an accident, it must be replaced as a complete unit together with its anchorages and the retaining bolts. Even if the seat belt does not show signs of visible defects, it may have lost its resistent properties.

Fit the winder.Tighten the winder retaining bolt.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SEAT BELT REEL.	M7/16''	4.0

Position the idler and fasten it using the bolt.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SEAT BELT IDLER..	7/16"	4.0

- 7040H42 rear pillar trim - r r - 7040G30 boot light bulb holder - r r (left side only) - 7040H50 rear panel - r r - 7050A10 rear seat - r+r - 7050A20 one-piece rear seat cushion - r r - 7040L40 front compartment scuff strip - r r