2429693 - 7065B18 CENTRE REAR SEAT BELT - R.R.

Removing ( Refitting )  - 7040L40  front compartment scuff strip - r r - 7050A20  one-piece rear seat cushion - r r - 7050A10  rear seat - r+r - 7040H50  rear panel - r r (left side)  - 7040G30  boot light bulb holder - r r - 7040H42  rear pillar trim - r r (left side) 1. Working at the rear of the roof lining, release the cover (1a) and open it.2. Undo the bolt.3. Move the centre rear seat belt idler.
1. Undo the bolt (1a) and move the belt idler (1b).2. Undo the bolt (2a) and keep the reel and belt (2b).
Refitting ( Removing ) Check that the seat belt is undamaged.
If the seat belt has been subjected to great stress, e.g. following an accident, it must be replaced as a complete unit together with its anchorages and the retaining bolts. Even if the seat belt does not show signs of visible defects, it may have lost its resistent properties.
Fit the winder.Tighten the winder retaining bolt.

FasteningComponentØValue(daNm)
-BoltREAR SEAT BELT REEL.M7/16''4.0
Position the idler and fasten it using the bolt.

FasteningComponentØValue(daNm)
-BoltREAR SEAT BELT IDLER..7/16"4.0
Position the centre idler and fasten it using the bolt.

FasteningComponentØValue(daNm)
-BoltREAR SEAT BELT IDLER..7/16"4.0
Close the idler cover. - 7040H42  rear pillar trim - r r - 7040G30  boot light bulb holder - r r - 7040H50  rear panel - r r (left side)  - 7050A10  rear seat - r+r - 7050A20  one-piece rear seat cushion - r r - 7040L40  front compartment scuff strip - r r