2429733 - 7210E18 R.R. FRONT WING
Removing
(
Refitting
)
Lift the bonnet lid.1. Protect door eges (1a), door sill (1b) and front pillar base
(1c) by applying adhesive tape.2. Undo the nut.3. Undo the bolts.4. Recover the washers.5. Remove the wing.
Refitting
(
Removing
)
Check the wing is undamaged.Position the wing and screw in the bolts
and nut without tightening.Check the wing is aligned with the door
and the bonnet lid. - 7005A14 front side door - adjust centering and moulding -
includes adaptation of hinges and seals on door compartmentTighten the bolts and nut. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | FRONT WING. BODYSHELL | M6 | 0.8 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | FRONT WING. BODYSHELL | M6 | 0.8 |