The turn signal activation signals are sent to pins 7 of connector
I and 30 of connector G of the Body Computer
The 'ignition ON' signal (INT) for the switch
H1 reaches the underdashboard control unit
B2
at pin 11 of
connector H and from there moves on to the Body Computer
M1
(pin
9 of connector F).
The hazard warning lights activation signal,
on the other hand, reaches pin 34 of connector G of
M1 from the
control button in the climate control system controls H80 (or M70).
The Body Computer
M1 controls the supply
for the side lights at the side F20 (left) and F21 (rght) from pins
2 and 13 of connector D, for the front side lights F10 (left) F11
(right) from pins 38 and 39 of connector B and for the rear side
lights F30 (left) F31 (right) from pins 12 and 3 of connector D.
The Body Computer
M1 is connected, via
the CAN line, to the instrument panel E50, to manage the 'direction
indicators' warning lights, the buzzer and, if there are failures
in the circuit, the 'failure' warning light.
The signal is sent, from pin 29 of connector
G of
M1, to light up the LED in the climate control system controls
button H80 (or M70).