The 'boot opening request' signal is sent by switch
I33 located
in the handle to pin 35 of connector E of Body Computer M1.
The aerial-receivier
P93
sends the
Body Computer
M1
the signal to open/close the doors and also
windows and sunroof, by connecting to pins 21 and 31 of connector
B
See E3040 CENTRAL LOCKING
.
The Body Computer
M1 implements the boot
release function in accordance with the control strategy described
- pin 11 of connector F via the line supplied by fuse F38 of the underfacia
junction unit B2, pin 18 of connector D - to control operation of
boot catch motor N57.
The boot release function, inside the Body
Computer
M1 pin 1 of connector F also has a dedicated earth connection:
pin 20 of connector F.
The geared motor is supplied until the opening
of the boot is detected: the boot not properly closed signal is
sent to the switch
I11 which is connected to pin 24 of connector
E (the same switch turns on the boot light using a different contact)
See
E2520
GLOVE COMPARTMENT LIGHT - LUGGAGE COMPARTMENT LIGHT
- SUN VISOR LIGHT
.
,