2429536 - 7015B10 single tailgate lock - r+r or repair with panel/protection removed

Removing ( Refitting ) 1. Disconnect the electrical connection for the microswitch.

	Name	Connector
1	Boot opening switch	I11

2. Undo the bolts.3. Move the lock (3a) slightly and disconnect the electrical connection (3b) for the motor.

	Name	Connector
3b	Boot lock gearmotor	N57

4. Remove the lock assembly (4a) releasing the emergency opening cable (4c) from the retainers (4b). - 7015B70  tail-gate lock motor - r r and check lock supply line , if necessary. Refitting ( Removing )  - 7015B70  tail-gate lock motor - r r and check lock supply lineCheck that the lock assembly is not damaged.Place the lock assembly in position attaching the emergency cable and connecting the electrical connection.Tighten the bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	TAIL-GATE LOCK	M6	0.9

Connect the electrical connection for the microswitch.Test that the lock works properly and is correctly aligned with the striker.