2429592 - 7040H16 roof panel lining - r r
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	 - 7065C30  interior l/h or r/h
grab handle (one) - r+r
                                           (all)
                                        - 7065C34  l/h or r/h sun blind (one) - r+r
                                           (left
and right)
                                        - 7040E10  front courtesy light - r+r - 7040H30  front pillar trim - r r
                                           (left
and right)
                                        - 7040L40  front compartment scuff strip - r r - 7050A20  one-piece rear seat cushion - r r - 7050A10  rear seat - r+r - 7040H50  rear panel - r r - 7040G30  boot light bulb holder - r r - 7040H38  central pillar upper element - r r
                                           (left
side)
                                        - 7040H42  rear pillar trim - r r
                                           (left
side)
                                        - 7040L20  tunnel trim - r r - 7040A18  glove compartment on facia - arrange - 7040A30  Left instrument panel lower TRIM - R.R. - 2125A30  lever/knob cover - r + r - 7040A28  TRIM on gearbox control panel - R.R.1. Working at the rear of the roof lining, release the cover (1a)
and open it.2. Undo the bolt.3. Move the centre rear seat belt idler.
		)
	 - 7065C30  interior l/h or r/h
grab handle (one) - r+r
                                           (all)
                                        - 7065C34  l/h or r/h sun blind (one) - r+r
                                           (left
and right)
                                        - 7040E10  front courtesy light - r+r - 7040H30  front pillar trim - r r
                                           (left
and right)
                                        - 7040L40  front compartment scuff strip - r r - 7050A20  one-piece rear seat cushion - r r - 7050A10  rear seat - r+r - 7040H50  rear panel - r r - 7040G30  boot light bulb holder - r r - 7040H38  central pillar upper element - r r
                                           (left
side)
                                        - 7040H42  rear pillar trim - r r
                                           (left
side)
                                        - 7040L20  tunnel trim - r r - 7040A18  glove compartment on facia - arrange - 7040A30  Left instrument panel lower TRIM - R.R. - 2125A30  lever/knob cover - r + r - 7040A28  TRIM on gearbox control panel - R.R.1. Working at the rear of the roof lining, release the cover (1a)
and open it.2. Undo the bolt.3. Move the centre rear seat belt idler.



 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Check that the cover is undamaged.Fit the lining in the vehicle through the
right side door housing.Fit the door and tailgate housing seals.Positino the right centre and rear pillar
trims, tighten the bolt and fit the cover.Place the finishing trims in position.Position the centre rear seat belt idler,
tighten the bolt and fit the cover.
		)
	Check that the cover is undamaged.Fit the lining in the vehicle through the
right side door housing.Fit the door and tailgate housing seals.Positino the right centre and rear pillar
trims, tighten the bolt and fit the cover.Place the finishing trims in position.Position the centre rear seat belt idler,
tighten the bolt and fit the cover.|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| - | Bolt | REAR SEAT BELT IDLER.. | 7/16" | 4.0 |