3238620 - 7005N20 front side door lock motor/catch assembly - rr with door panel and support frame removed
Removing
(
Refitting
)
- 7005A04 front side door water
guard protection - r r or replace with door panel removed - 7005C54 front side door internal opening return mechanism
(with handle) - r r for repair or replace with different version - 7005D24 front door window rear guide - r r1. Disconnect, from the lock side, the linkage connecting to the
outer handle.2. Undo the bolts.3. Move the lock over slightly.4. Disconnect the electrical connections (4a, 4b, 4c) then extract
the loc, | Name | Connector |
|---|---|---|
| 4a | Front door lock gear motor left | N50A |
| Name | Connector |
|---|---|---|
| 4b | Front door lock gear motor left | N50B |
| Name | Connector |
|---|---|---|
| 4c | Front door lock gear motor left | N50C |
| Name | Connector |
|---|---|---|
| 4a | Right front door lock geared motor | N51A |
| Name | Connector |
|---|---|---|
| 4b | Right front door lock geared motor | N51B |
| Name | Connector |
|---|---|---|
| 4c | Right front door lock geared motor | N51C |
Refitting
(
Removing
)
Check that the lock is intact
and undamaged.Connect the electrical connections.Fit the catch.Tighten the bolts.Connect the connecting rods on the lock
side with the outer handle.Check that the lock works by operating
the outer handle. - 7005D24 front door window rear guide - r r - 7005C54 front side door internal opening return mechanism
(with handle) - r r for repair or replace with different version - 7005A04 front side door water guard protection - r r or replace
with door panel removedTest the operation of the lock by operating
the inner handle.