3237414 - 0010T62 BRAKE and/or CLUTCH FLUID - Replace. fluid - Includes. washing pipes and bleeding air

Position the vehicle on the ramp.1. Remove the protective cap on the brake caliper bleed valve. 2. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Open the bleed valve on the brake caliper.Operate the brake pedal until all the fluid has come out. Repeat the above operations for the other brake calipers.
1. Open the protective cover.2. Connect the collection system (pipe and reservoir) to the connector on the clutch hydraulic control actuator. 3. Lift the retaining clip (3a) until the first click is heard and remove the pipe (3b) sufficiently to uncover the bleed hole. Operate the clutch pedal until the system is completely empty.
1. Connect the tool to the brake-clutch fluid reservoir.

NameCountry
1Brake/clutch bleeding equipment1.806.097.001
2. Slowly open the cock on the reservoir of the device and fill the brake-clutch systems with the specified fluid.

TypeComponentNameQty.
2Fluid [l]BRAKE-CLUTCH HYDRAULIC SYSTEMSTUTELA CAR TOP 4 FOR ALFA ROMEO0.5
Wait until the air contained in the hydraulic brake-clutch systems has fully emerged. Close the bleed valves on the brake calipers and fit the protective caps. Fit the pipe fully home in its seat on the hydraulic clutch control actuator and secure with the retaining clip, then close the protective cover. Remove the fluid collection devices.Remove the equipment.

NameCountry
-Brake/clutch bleeding equipment1.806.097.001
Proceed with refitting  Refer to op.. 5530B52  Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting  Refer to op.. 5530B10  battery - r+r . Remove the car from the ramps.Check the efficiency of clutch release, gear engagement and the braking system.