1008A42 GEAR BOX LEFT RIGID MOUNT - R R - Alfa - 156 - eLearn

3237444 - 1008A42 gear box left rigid mount - r r

) Position the vehicle on the ramp. Proceed with removal - 4450B02 left front wheel r r . Proceed with removal - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with removal - 7055B54 under-engine guard - r r . Position a hydraulic jack under the engine.1. Undo the bolts (1a), (1b) and remove the gearbox side power unit rigid support (1c).

Refitting ( Removing

) 1. Refit the gearbox side power unit rigid support (1a) in its seating and tighten the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	(Gearbox side) 4.5 ÷ 5.5

2. Undo the bolt fixing the gearbox side rigid power unit support to the flexbile block to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	-	-	-	-

Remove the hydraulic jack from beneath the engine Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with refitting - 4450B02 left front wheel r r . Remove the car from the ramps.