1088C10 WATER PUMP - R + R - Alfa - 156 - eLearn

3237710 - 1088C10 water pump - r + r

) Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the negative battery terminal.

	Name	Connector
-	Battery	A1B

Proceed with removal - 4450B04 right front wheel r r . Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 1016A40 ignition coil cover on cylinder head- r+r . Proceed with removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement . 1. Disconnect the lower coolant outlet hose from the radiator and drain the engine coolant.

Manually press the springs and remove the rapid attachment for the hose.

Collect the coolant using a suitable container.

1. Undo the bolts (1a) and remove the water pump (1b) complete with O-ring.

Refitting ( Removing

) 1. Place the water pump (1a), complete with O-Ring, back in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	COOLANT PUMP	M8	(Cylinder head side) 2.3 ÷ 2.8

Connect the rapid attachment for the bottom coolant outlet hose from the radiator. Proceed with refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement . Proceed with refitting - 1016A40 ignition coil cover on cylinder head- r+r . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 4450B04 right front wheel r r . Connect the negative (-) battery terminal. Refill the engine cooling system with coolant - 0010T20 coolant change . Remove the car from the ramps.