1088E10 RADIATOR COOLING FAN - R + R - Alfa - 156 - eLearn

3237713 - 1088E10 radiator cooling fan - r + r

) Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the negative battery terminal.

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connections from the engine cooling fan resistor.

	Name	Connector
1	Engine fan adjustment resistor - 1	O10

2. Disconnect the electrical connection from the radiator cooling fan motor (2a) and release the electrical wiring from the band (2b).

	Name	Connector
2a	Engine fan motor - 1	N11

1. Undo the upper bolts fixing the radiator cooling fan.

Proceed with removal - 7055B54 under-engine guard - r r . 1. Undo the lower bolts (1a) and remove the radiator cooling fan (1b).

Refitting ( Removing

) Place the radiator cooling fan back in its housing and secure it using the lower bolts. Proceed with refitting - 7055B54 under-engine guard - r r . Tighten the upper bolts fixing the radiator cooling fan.Connect the electrical connection to the radiator cooling fan motor and secure the electrical wiring to the band.Connect the electrical connections to the resistor for the engine cooling fan.Connect the negative (-) battery terminal.Remove the car from the ramps.