3237720 - 1092E24 counter-rotating shaft pulley - r + r with toothed belt removed

 Refer to op.. 1092E26  counter rotating shaft pulley - r + r Removing ( Refitting ) PROCEED AS FOLLOWS FOR THE LEFT COUNTER-BALANCE SHAFT COVER.1. Undo the bolt (1a) for the left counter-balance shaft pulley using the tool (1b) for counter-torque.

NameCountry
1bCounter-torque1.820.286.000
2. Remove the left counter-balance shaft pulley.
PROCEED AS FOLLOWS FOR THE RIGHT COUNTER-BALANCE SHAFT COVER.1. Undo the bolt (1a) for the right counter-balance shaft pulley using the tool (1b) for counter-torque.

NameCountry
1bCounter-torque1.820.286.000
2. Remove the right counter-balance shaft pulley.
Refitting ( Removing ) PROCEED AS FOLLOWS FOR THE RIGHT COUNTER-BALANCE SHAFT COVER.1. Place the right counter-balance shaft pulley back in its housing.2. Tighten the bolts (2a) for the right counter-balance shaft pulley to the recommended torque using the tool (2b) for counter-torque.

FasteningComponentØValue(daNm)
2aBoltCOUNTER-ROTATING SHAFT PULLEYM10(Counter balance shaft side) 4.5 ÷ 5.5

NameCountry
2bCounter-torque1.820.286.000
PROCEED AS FOLLOWS FOR THE LEFT COUNTER-BALANCE SHAFT COVER.1. Place the left counter-balance shaft pulley back in its housing.2. Tighten the bolts (2a) for the left counter-balance shaft pulley to the recommended torque using the tool (2b) for counter-torque.

FasteningComponentØValue(daNm)
2aBoltCOUNTER-ROTATING SHAFT PULLEYM10(Counter balance shaft side) 4.5 ÷ 5.5

NameCountry
2bCounter-torque1.820.286.000