3237754 - 1080E60 pipe from fuel vapour separator to activated carbon filter - r r

Removing ( Refitting ) Position the vehicle on the ramp.1. Undo the bolts (1a) and remove the plastic protections (1b) of the fuel and fuel vapour pipes. 1. Disconnect the rapid attachment for the pipe from the fuel vapour separator to the active charcoal filter, separator side. 1. Release the pipe from the fuel vapour separator to the active charcoal filter from the underbody fastenings. Proceed with removal  - 1016A10  sound-proofing cover - r + r . Proceed with removal  - 1008C10  power unit upper reaction link r r . Proceed with removal  - 1008C16  body link bracket - r r . Release rigid pipe section from the fuel vapour separator to the active charcoal filter from the attachments near the alternator.1. Disconnect the rapid attachment for the pipe from the fuel vapour separator to the active charcoal filter, active charcoal filter side, and remove it. Refitting ( Removing ) Refit in its seating the pipe from the fuel vapour separator to the active charcoal filter and connect the rapid attachment on the active charcoal filter side.Secure the rigid pipe section from fuel vapour separator to active charcoal filter from the attachments located near the alternator. Proceed with refitting  - 1008C16  body link bracket - r r . Proceed with refitting  - 1008C10  power unit upper reaction link r r . Proceed with refitting  - 1016A10  sound-proofing cover - r + r . Secure the pipe from the fuel vapour separator to the active charcoal filter to the fastenings under the body.Connect the rapid attachment for the pipe from the fuel vapour separator to the active charcoal filter, separator side.Refit in its seating the plastic protections of the fuel and fuel vapour pipes and secure them with their bolts.Remove the car from the ramps.