4420B18 REAR WISHBONE - R R - Alfa - 156 - eLearn

3238203 - 4420B18 rear wishbone - r r

) Position the vehicle on the ramp.Raise the vehicle. - 4450B11 WHEEL (one) rear - R.R.1. Undo the nut fixing the rear suspension rear track control arm to the crossmember.2. Undo the bolt (2a) and remove the rear suspension rear wishbone (2b).3. Remove the bush.

Refitting ( Removing

) Fit the rear suspension rear track control arm complete with bush and secure it to the shock absorber tightening the bolt to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR WISHBONE	M12	(Shock absorber side) 9.5 ÷ 11.6

Tighten the nut fixing the rear suspension rear track control arm to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SUSPENSION REAR WISHBONES	M12	(Crossmember side) 6.2 ÷ 6.8

- 4450B11 WHEEL (one) rear - R.R.Lower the vehicle.Remove the car from the ramp. Check and if necessary adjust the wheel geometry values - 4450A40 rear wheel geometry - check using optical equipment .