3239072 - 1016E38 single cylinder head or (one) l or r, removed - grinding

Clean any residues of sealant from the cylinder head and front main bearing cap mating surfaces.Check that the planarity of the lower cylinder head surface is within the recommended values.

	Measurement		Value
-	Cylinder head lower plane planarity (mm)		0.1

1. If the planarity of the lower cylinder head surface is not within the recommended values, reface the lower cylinder head surface without exceeding the minimum permissible height for the combustion chamber.

	Measurement		Value
1	Combustion chamber minimum permissible height (mm)		12.8 ÷ 13.2

The volume of the combustion chamber for each cylinder is given below.

	Measurement		Value
-	Combustion chamber volume (c.c.)		38.2