3237446 - 1008A44 rear rigid mount - r r
Removing
(
Refitting
)
- 1076B50 exhaust pipe attachment to engine - r + r
.
Position a hydraulic jack under the gearbox.1. Undo the bolts fixing the rigid power unit support to the gearbox.2. Recover the exhaust pipe rigid support.3. Undo the bolt (3a) and remove the rigid rear support for the
power unit (3b).
Refitting
(
Removing
)
Fit the rigid rear support for the power
unit and fix it to the flexible mounting using the bolt.Fix the rigid rear support for the power
unit and the rigid support for the exhaust pipe to the gearbox tightening
the bolts to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | POWER UNIT RIGID REAR MOUNT | M12 | (Gearbox side) 7.5 ÷ 9.2 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | POWER UNIT RIGID REAR MOUNT | M16 | Gearbox side 10.2 - 12.6 |