3237449 - 1008B10 power unit front mount (timing side) flexible block - replace

Removing ( Refitting ) Position the vehicle on the ramp.Raise the car.1. Position a hydraulic jack under the power unit timing side front support.2. Undo the bolt fixing the power unit timing side front support to the flexible mounting.3. Undo the bolts (3a) and remove the flexible mounting for the power unit timing side front support (3b).
1. Fit a new flexible mounting for the power unit timing side front support (1a) and fix it to the bodyshell tightening the bolts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bBoltFRONT RUBBER MOUNTSM62.7 - 3.4
2. Tighten the bolt fixing the powr unit timing side front support to the flexible mounting to the recommended torque.

FasteningComponentØValue(daNm)
2BoltENGINE MOUNT TIMING SIDEM127.5 - 9.2
3. Remove the hydraulic jack from under the power unit timing side front support.
Lower the vehicle.Remove the vehicle from the ramp.