3237853 - 1092G40 cam belt tensioner - r r
Removing
(
Refitting
)
- 4450B10 Front WHEEL (one) - R.R. - 7055B64 Engine compartment DUST shield in front wheel arch
(one), left or right - R.R. - 1092G10 single engine belt r r1. Position a hydraulic jack under the rigid power unit support,
timing side.2. Undo the bolt fixing the timing side rigid power unit support
to the flexible mounting.Lower the timing side rigid power unit
support, as necessary, using the hydraulic jack.3. Undo the bolt (3a) and remove the engine components single drive
belt cam belt tensioner (3b).
Refitting
(
Removing
)
Fit the single drive belt cam tensioner
and fix it using the bolt without tightening it.Raise the timing side rigid power unit
support using the hydraulic jack.Tighten the bolt fixing the timing side
rigid power unit support to the flexible mounting to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | ENGINE MOUNT TIMING SIDE | M12 | (Flexible mounting side) 7.5 - 9.2 |