3330D24 VACUUM PIPE FOR BRAKE SERVO - R+R - Alfa - 156 - eLearn

3238079 - 3330D24 vacuum pipe for brake servo - r+r

) Proceed with the removal - 5530B10 battery - r+r . Proceed with the removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . 1. Disconnect the brake servo vacuum pipe from the brake servo single-acting valve.

1. Loosen the band and disconnect the brake servo vacuum pipe from the intake manifold.

1. Release the brake servo vacuum pipe from the fastenings and remove it.

Refitting ( Removing

) Place the vacuum pipe for the brake servo back in its housing and connect it. Proceed with the refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with the refitting - 5530B10 battery - r+r .

Removing ( Refitting

) 1. Loosen the band and disconnect the air supply hose from the heat exchanger to the inlet manifold side inlet manifold and move aside.

Proceed with the removal - 5530B10 battery - r+r . Proceed with the removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . 1. Disconnect the brake servo vacuum pipe from the brake servo single-acting valve.2. Release the vacuum pipe for the brake servo from the fastenings.3. Disconnect the E.G.R. system vacuum intake pipe from the brake servo vacuum pipe.

1. Loosen the band and disconnect the brake servo vacuum pipe from the vacuum unit.

Refitting ( Removing

) Refit the brake servo vacuum pipe, connect to the vacuum pump and tighten the band.Connect the E.G.R. system vacuum intake pipe to the brake servo vacuum pipe.Fix the vacuum pipe for the brake servo to the securing band.Connect the brake servo vacuum pipe to the single-acting valve. Proceed with the refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with the refitting - 5530B10 battery - r+r . Conect the air supply hose from the heat exchanger to the inlet manifold, inlet manifold side, and tighten the band.