3238294 - 5020B80 heater system wiring bundle - r r or replace
|  | For precise identification of the electrical connections, see Wiring Diagrams Section. | 
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	 - 7040G24  switch for facia compartment
light - r+r - 7040G20  facia compartment light bulb holder - r+r - 7040A31  flap assembly - r r - 7040A14  flap of glove compartment trim element (one) - arrange - 5040D22  control (one) of air conditioner control support
- arrange - 7065C42  ashtray (one) r+r - 5570T80  car radio unit - r+r - 2125C24  gear lever knob - r + r - 7040A60  under facia trim - r+r - 7040A65  passenger compartment box lock , one , r r
                                           (right
and left).
                                        - 3380A44  handbrake/linkage protection - r+r - 7040L28  tunnel switch panel - r r - 7040L20  tunnel trim - r r
		)
	 - 7040G24  switch for facia compartment
light - r+r - 7040G20  facia compartment light bulb holder - r+r - 7040A31  flap assembly - r r - 7040A14  flap of glove compartment trim element (one) - arrange - 5040D22  control (one) of air conditioner control support
- arrange - 7065C42  ashtray (one) r+r - 5570T80  car radio unit - r+r - 2125C24  gear lever knob - r + r - 7040A60  under facia trim - r+r - 7040A65  passenger compartment box lock , one , r r
                                           (right
and left).
                                        - 3380A44  handbrake/linkage protection - r+r - 7040L28  tunnel switch panel - r r - 7040L20  tunnel trim - r r
                            
 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Check that the wiring is undamaged
and that the individual conductors are firmly attached to the connections.Check that the connections are fitted with
anti-slip devices (secondary lock).If necessary, check the continuity.Refit the air conditioner case wiring harness.Connect the retaining clips.Connect the electrical connections.Connect the clips to the facia wiring harness.
		)
	Check that the wiring is undamaged
and that the individual conductors are firmly attached to the connections.Check that the connections are fitted with
anti-slip devices (secondary lock).If necessary, check the continuity.Refit the air conditioner case wiring harness.Connect the retaining clips.Connect the electrical connections.Connect the clips to the facia wiring harness.
                            
|  | For precise identification of the electrical connections, see Wiring Diagrams Section. |