3237615 - 1084B30 engine oil filter r r
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Position the vehicle on the ramp.
                                          Proceed with removal 
                                           - 7055B54  under-engine guard -
r r
                                           .
                                       
                                          Proceed with removal 
                                           - 1076A46  heat shield for catalytic
preconverter r r
                                           .
                                       1. Remove the cartridge engine oil filter (1a) using the tool (1b).
		)
	Position the vehicle on the ramp.
                                          Proceed with removal 
                                           - 7055B54  under-engine guard -
r r
                                           .
                                       
                                          Proceed with removal 
                                           - 1076A46  heat shield for catalytic
preconverter r r
                                           .
                                       1. Remove the cartridge engine oil filter (1a) using the tool (1b). |  | Recover the engine oil which comes out in a suitable container. | 
|  | Name | Country | 
|---|---|---|
| 1b | Self-tightening spanner | 1.871.001.200 | 

 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Lubricate the gasket with engine oil and
fit the engine oil filter, tightening fully by hand. 
                                          Proceed with refitting 
                                           - 1076A46  heat shield for catalytic
preconverter r r
                                           .
                                       
                                          Proceed with refitting 
                                           - 7055B54  under-engine guard -
r r
                                           .
                                       
                                          Refill the engine oil lubrication system 
                                          - 0010T11 engine oil check level and top up 
                                           .
                                       Remove the car from the ramps.
		)
	Lubricate the gasket with engine oil and
fit the engine oil filter, tightening fully by hand. 
                                          Proceed with refitting 
                                           - 1076A46  heat shield for catalytic
preconverter r r
                                           .
                                       
                                          Proceed with refitting 
                                           - 7055B54  under-engine guard -
r r
                                           .
                                       
                                          Refill the engine oil lubrication system 
                                          - 0010T11 engine oil check level and top up 
                                           .
                                       Remove the car from the ramps.