3237795 - 1060E10 pressure pump - r r

Removing ( Refitting ) Position the vehicle on the ramp Proceed with removal  - 1016A10  sound-proofing cover - r + rEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 1008C10  power unit upper reaction link r r Proceed with removal  - 1060G80  ds electric injection control unit - r r Proceed with removal  - 4450B04  right front wheel r r Proceed with removal  - 7055B54  under-engine guard - r r Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R. Proceed with removal  - 1092G10  single engine belt r r Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. Proceed with removal  - 1092G20  engine component single belt fixed tensioner - one - r + r Proceed with removal  - 1032D12  timing system protective cover(s) - r + r Proceed with removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement1. Disconnect the rapid attachment for the fuel return pipe from the fuel filter, return manifold pipe side. 2. Disconnect the rapid attachment for the fuel return pipe to the tank, return manifold pipe side. 3. Loosen the band and disconnect the fuel return pipe from the pressure pump, fuel return manifold pipe side. 1. Undo the bolts (1a) and remove the fuel return manifold pipe (1b) complete with the pipe from the injectors to the fuel recovery manifold (1c). 1. Undo the bolt fixing the guide pipe for the engine oil dipstick to the pressure pump mounting. 2. Disconnect the electrical connection from the fuel pressure regulator.

	Name	Connector
2	Fuel pressure regulator	N77

1. Stop the pressure pump pulley from rotating using two bolts. 2. Undo the pressure pump pulley nut.Undo the two bolts fitted previously to stop the rotation of the pressure pump pulley. 1. Remove the pressure pump pulley (1a) using the tool (1b).

	Name	Country
1b	Extractor	1.860.854.001

1. Undo nuts (1a) and remove pressure pump (1b) from its mount. Refitting ( Removing ) 1. Fit the clutch pump (1a) back in its housing and tighten the nuts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Nut	PRESSURE PUMP	M8	(Support side) 2.3 ÷ 2.8

1. Replace the pressure pump pulley in its housing.2. Stop the pressure pump pulley from rotating using two bolts. 3. Tighten the pressure pump pulley nut to torque.

	Fastening	Component	Ø	Value(daNm)
3	Nut	PRESSURE PUMP CONTROL PULLEY	M14	4.5 ÷ 5.5

Undo the two bolts fitted previously to stop the rotation of the pressure pump pulley. Connect the electrical connection to the fuel pressure regulator. Tighten the bolt fixing the engine oil dipstick guide pipe to the pressure pump mounting.Place the fuel return manifold pipe complete with the pipe from the injectors to the fuel recovery manifold back in its housing and secure it using the bolts.Connect the fuel return pipe to the pressure pump, fuel return manifold pipe side and tighten the band.Connect the rapid attachment for the fuel return pipe to the tank, fuel return manifold pipe side.Connect the rapid attachment for the fuel return pipe from the fuel filter, return manifold pipe side. Proceed with refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r Proceed with refitting  - 1092G20  engine component single belt fixed tensioner - one - r + r Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. Proceed with refitting  - 1092G10  single engine belt r r Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R. Proceed with refitting  - 7055B54  under-engine guard - r r Proceed with refitting  - 4450B04  right front wheel r r Proceed with refitting  - 1060G80  ds electric injection control unit - r r Proceed with refitting  - 1008C10  power unit upper reaction link r rConnect the negative (-) battery terminal Proceed with refitting  - 1016A10  sound-proofing cover - r + rRemove the car from the ramps.